How Are Utilities Shown on an ALTA Survey?

Commercial property with visible utility equipment, power lines, and surrounding site features

You’ve got an ALTA survey for a commercial property, and the drawing is full of lines for water, sewer, gas and power. Before you plan a building pad or sign off on a loan, you need to know what those lines can tell you. Utilities on an ALTA survey give you a clear record of what the surveyor could see and what the scope covered. They don’t promise the exact path of every pipe or cable below the ground. That gap matters most when you plan to build, dig or borrow against the site.

Which Utility Features Can Appear on the Survey?

Every ALTA/NSPS Land Title Survey must show observed evidence of utilities. The 2026 ALTA/NSPS standards took effect on February 23, 2026, and they keep this rule in the minimum requirements. The surveyor locates visible signs of utilities that serve the property or cross it to serve someone else.

On the drawing, that observed evidence often includes:

  • Manholes, valve boxes and water or gas meters
  • Utility poles with their overhead lines
  • Fire hydrants and electric transformers
  • Paint marks or flags from a recent utility locate
  • Pipeline marker posts

Each feature gets a symbol and a position tied to the boundary. When the crew finds two related features, such as a pair of sewer manholes, the drawing may connect them with a line. Extra underground detail comes into play only when the client orders it as an optional Table A item.

Why Utility Lines May Not Tell the Whole Story

A utility line on an ALTA survey marks where the surface evidence points. The pipe or cable itself could sit off to one side or run deeper than you’d guess. The 2026 standards say as much, since no one can give a full and exact picture of buried features without digging.

Think about a straight line drawn between two manholes. Sewer pipes tend to run straight between structures, but water and gas lines can bend or branch where nothing shows at the surface. Some fiber and electric cables leave no surface clue at all, so a field crew has nothing to measure.

Old service lines can also stay in the ground long after a building comes down. A cleared lot may look empty on the survey while still holding pipes from past use. Treat each utility line on the drawing as a well-informed starting point rather than a final answer.

Read Utility Locations Together With Easements

Utility lines show where something seems to be, while easements show who has the right to keep it there. A buyer or lender needs both before deciding what the land can handle. Reading one without the other can leave a blind spot in your due diligence.

The surveyor plots recorded easements from the title commitment when the documents give enough detail to place them. Once you compare those easement strips with the mapped utilities, a few patterns can show up. A line may run neatly inside its easement. A line may cross ground with no recorded easement, and that gap deserves a question for your title company or attorney. The title commitment may also list a blanket easement with no defined route, so the survey can’t draw a strip for it.

Some easements favor a pipeline company or power provider and limit what you can build, pave or plant on top. The survey puts the physical and recorded picture on one sheet. Your title professional or attorney decides what those rights mean for the deal.

Louisiana Sites Can Have Several Utility Corridors

Commercial and industrial land often sits near more than one utility system. A single tract might carry a pipeline right-of-way, an overhead power line, a public water main and a drainage servitude. Louisiana law uses the word servitude for many rights that other states call easements, so you may see both terms in your title documents.

When several corridors share a site, they can squeeze the usable ground. A building pad, truck route or new entrance may need to fit between two corridors or cross one with the holder’s consent. Pipeline operators often set their own rules for crossings and heavy equipment, so their requirements belong in your early planning.

Louisiana parishes keep servitudes and other property rights on record through the clerk of court’s office. Your title search and survey both draw on those parish records. Laying the corridors over your proposed site plan during due diligence shows how much buildable land you’re really buying and which access points work.

Know When the Survey Needs More Utility Detail

A standard ALTA survey suits most purchase and loan reviews. It can fall short once you plan to dig, design or rebuild. If preliminary design, excavation or redevelopment is on the table, talk with your surveyor about scope before fieldwork starts.

Table A Item 11 lets you add utility information from plans and reports or from a private utility locate the surveyor coordinates. ALTA’s 2026 guidance points out that a private locate under Item 11 doesn’t automatically mean an 811 request or a Level B subsurface utility engineering investigation. So spell out exactly what level of detail your project needs. If your engineer needs design-grade data, the standards direct that work to Table A Item 21 for an engineering design survey.

The survey also doesn’t replace the dig-notice process. Anyone planning to excavate still needs to contact 811 before work begins. The 811 locate and the ALTA survey serve different jobs, so one doesn’t stand in for the other.

Frequently Asked Questions

What do utility symbols mean on an ALTA survey?

Each symbol stands for a specific feature the crew found, such as a manhole, hydrant, meter or power pole. Survey firms don’t all use identical symbols, so the legend on your sheet is the best guide. Lines often carry a letter code, like W for water or G for gas, to show which utility they represent.

Can an ALTA survey show utilities outside the property boundary?

It can, within limits. The survey focuses on utilities on the property or serving it, so it may show where a service line meets a main in the street. Offsite easements that benefit the property can also appear when the client requests that optional item and the documents allow the surveyor to plot them.

Will abandoned utility lines appear on an ALTA survey?

They show up only when surface evidence or a supplied plan reveals them. A field crew usually can’t tell an active line from a dead one by looking at a cover or marker. The drawing may label a line as abandoned when a record or the utility owner confirms it.

author avatar
Surveyor

More Posts

ALTA Surveys for Commercial Sites With Shared Access

ALTA surveys show where those shared routes actually run and whether they match the recorded rights, so buyers and lenders aren’t guessing. Two stores, one driveway, and a recorded agreement nobody has read in twenty years. Shared access is common on commercial sites, and it’s one of the easiest places

Read More »

Choosing ALTA Survey Table A Items Before Ordering

Most commercial buyers order an ALTA survey because a lender or title company asks for one. Then the surveyor sends over a list of optional add-ons, and the buyer isn’t sure which ones matter. That list is called Table A. It lets you add details beyond the standard survey, such

Read More »

Due Diligence Surveys for Land With Drainage Canals

A drainage canal along the back of a parcel can look harmless on an aerial photo. Some buyers even see it as a bonus, a clean edge that frames the site. Canals usually come with easements, setbacks, and maintenance rights that belong to someone else, and those limits can shrink

Read More »
Commercial property with visible utility equipment, power lines, and surrounding site features
alta survey
Surveyor

How Are Utilities Shown on an ALTA Survey?

You’ve got an ALTA survey for a commercial property, and the drawing is full of lines for water, sewer, gas and power. Before you plan a building pad or sign off on a loan, you need to know what those lines can tell you. Utilities on an ALTA survey give

Read More »
Property survey showing a building layout, dimensions, and boundary lines for a mortgage survey
mortgage survey
Surveyor

Mortgage Surveys When the Legal Description Looks Wrong

You’re close to closing, and something in the papers doesn’t match. The lot number on your mortgage survey differs from the deed, or a dimension or a parish name reads differently. That mismatch deserves attention right away, because the written description ties the loan to the land. In Louisiana, the

Read More »
An older wooden fence in front of a residential home, highlighting a property feature examined during a loan closing survey
land surveying
Surveyor

Loan Closing Surveys for Homes With Old Fences

You’re buying a house. There’s an old fence in the backyard. Maybe it leans a little. Maybe it doesn’t line up with the neighbor’s fence. Before you close, it helps to know what that fence really tells you about the property. A loan closing survey is a tool your lender

Read More »